RESTAURANT ORDERING13 min read

How to Calculate Food Cost: Plate, Period and Online Orders

How to calculate food cost per plate with yield, per week from inventory, ideal vs actual, menu prices from a target, and online order costs. Free template.

By Team RestroPress

To calculate food cost for a single dish, add up what each ingredient in one portion really costs after trim and cooking loss, then divide by the menu price. To calculate food cost for the whole restaurant, take beginning inventory, add purchases, subtract ending inventory, and divide the result by food sales for the same period. That is how to calculate food cost in two lines. The rest of this guide shows the parts that decide whether the answer is right: yield, the gap between ideal and actual cost, setting prices from a target, and the extra costs an online order carries.

Every example uses one dish, a beef and broccoli rice bowl, so you can follow the same numbers from the cutting board to the delivery bag. A copyable recipe cost card sits near the end.

The food cost formulas you need

There are four numbers, and most confusion comes from mixing them up.

Number Formula What it answers
Plate cost Sum of every ingredient in one portion, at edible-portion cost What does one serving cost me to make?
Plate cost percentage Plate cost ÷ menu price × 100 Is this dish priced right?
Actual food cost percentage (Beginning inventory + purchases – ending inventory) ÷ food sales × 100 What did the kitchen really spend?
Ideal food cost percentage Sum of (units sold × plate cost) ÷ food sales × 100 What should it have spent if every recipe was followed?

Plate cost works one dish at a time. Actual food cost works on a week or a month. Ideal food cost connects the two, and the difference between ideal and actual is where money goes missing.

How to calculate food cost per plate, with yield

The most common costing mistake is pricing an ingredient at the price on the invoice. That is the as-purchased (AP) cost. Your guest eats the edible-portion (EP) part, after you trim, peel, bone, cook and drain. The ratio between the two is the yield.

You do not have to guess yields. The USDA publishes average yields for hundreds of foods for school kitchens. Its Food Buying Guide yield examples show that 1 lb of fresh, untrimmed broccoli gives 0.81 lb ready to cook, and 1 lb of raw ground beef with no more than 15% fat gives 0.75 lb cooked and drained. Those are averages. Your own trim and cooking method will differ, so run a yield test on your top proteins (method below).

Worked example: one beef and broccoli rice bowl

Beef. Ground beef 85/15 costs $5.20 per lb as purchased. At a 75% cooked yield, each cooked pound really costs $5.20 ÷ 0.75 = $6.93. The bowl gets 5 oz cooked, which is 5 ÷ 16 = 0.3125 lb, so the beef costs 0.3125 × $6.93 = $2.17. Priced at the invoice rate, it would have looked like $1.63. That 54-cent error repeats on every bowl you sell.

Broccoli. Untrimmed broccoli costs $2.40 per lb. At 81% yield, the EP cost is $2.40 ÷ 0.81 = $2.96 per lb. A 4 oz portion (0.25 lb) costs $0.74.

Rice. Some ingredients gain weight. In this kitchen’s test, 10 lb of dry jasmine rice at $1.50 per lb cooked up to 29 lb, a yield of 290%. The EP cost is $1.50 ÷ 2.9 = $0.52 per lb cooked, so a 7 oz scoop (0.4375 lb) costs $0.23.

Batch sauce. Cost sub-recipes as their own card. A 64 oz batch of soy-ginger sauce costs $9.60 to make, or $0.15 per oz. Two ounces on the bowl cost $0.30.

The rest. One fried egg from a $3.36 dozen is $0.28. Scallion and sesame garnish is $0.12. Frying oil is $0.06.

The Q factor. Salt, pepper, a squeeze of lime and the odd extra drizzle are too small to measure each time. Many kitchens add a “questionable ingredients” allowance of a few percent. Here, 3% of the $3.90 subtotal adds $0.12.

Plate cost: $2.17 + $0.74 + $0.23 + $0.30 + $0.28 + $0.12 + $0.06 + $0.12 = $4.02. If the bowl sells for $13.50, its plate cost percentage is $4.02 ÷ $13.50 = 29.8%.

How to run a yield test in 15 minutes

  1. Weigh one full case or pack as it arrives. Note the invoice price.
  2. Prep it exactly as the line does: trim, portion or cook to your spec.
  3. Weigh the usable product. Weigh trim you can reuse (stock bones, scraps for staff meals) separately.
  4. Divide usable weight by purchased weight. Repeat on two more deliveries and average the three.
  5. Write the yield on the recipe card and retest when you change supplier, cut or cooking method.

Actual food cost for a week or a month

Plate cost tells you what a dish should cost. The period calculation tells you what the kitchen actually consumed. You need a stock count at the start and end of the period, valued at current invoice prices, and every food invoice in between.

Line One week
Beginning inventory, Monday morning $6,250
Add food purchases for the week $9,480
Subtract ending inventory, Sunday night $5,890
Food used $9,840
Subtract staff meals (record them as a labor benefit) $310
Subtract transfers to the bar (lemons, cream, garnish) $120
Cost of food sold $9,410
Food and non-alcoholic drink sales $29,600
Actual food cost percentage 31.8%

The two adjustment lines are the ones most guides leave out. Without them, this kitchen would report 33.2% and blame the cooks for food that was eaten by staff or poured at the bar. If you comp dishes for guests, keep comps in food cost but track them on their own report so you can see them.

Three rules keep the number honest. Count on the same day and time each period. Use sales net of discounts and excluding sales tax. And put invoices in the period the food arrived, not the week you paid them.

Ideal vs actual food cost: what the gap tells you

Ideal food cost, also called theoretical food cost, is what the week would have cost if every plate matched its recipe card and nothing was wasted. Multiply each item’s units sold by its plate cost, add them up and divide by sales.

Item Sold Sales Plate cost Ideal cost
Beef and broccoli rice bowl 520 $7,020 $4.02 $2,090.40
Chicken katsu curry 410 $6,150 $4.35 $1,783.50
Salmon poke bowl 260 $4,550 $6.10 $1,586.00
Veggie noodle bowl 300 $3,600 $2.70 $810.00
All other items (sides, drinks, desserts) $8,280 various $2,420.10
Total $29,600 $8,690.00

Ideal food cost is $8,690 ÷ $29,600 = 29.4%. Actual was 31.8%. The gap is 2.4 points, or $9,410 minus $8,690 = $720 a week. Over 52 weeks that is about $37,400 of food that was bought, paid for and never sold.

The size of the gap matters more than the actual percentage itself. A restaurant at 34% actual with a 1-point gap is running tightly; its menu is simply priced for a higher food cost. A restaurant at 30% actual with a 4-point gap has a leak. As a working rule, investigate any gap above about 2 points, and any week where the gap jumps.

What you see Likely causes First check
Actual well above ideal Heavy portions, unlogged waste, theft, comps not rung in, short deliveries accepted Weigh 10 portions of your top three dishes
Ideal creeping up on its own Supplier prices rose, recipe cards not updated Recost the cards from this month’s invoices
Actual below ideal Counting error, invoices missing from the period, short portions going out Recount high-value items, match invoices to deliveries
Gap swings week to week Inconsistent count day or method Fix the count day and use the same shelf-order sheet

Setting a price from a target food cost percentage

Once you trust the plate cost, pricing is one division: menu price = plate cost ÷ target food cost percentage. For the bowl at a 30% target, $4.02 ÷ 0.30 = $13.40, which this restaurant rounds to $13.50.

What target should you use? The most reliable US benchmark is the National Restaurant Association’s operations survey of more than 900 operators. It found that food and non-alcoholic drink costs were a median 32.0% of sales at full-service restaurants and 32.4% at limited-service restaurants in 2024, according to the Association’s September 2025 summary of food cost ratios. The many “28% to 35%” ranges you will see online are usually unsourced, so treat 32% as the national midpoint rather than a rule.

Your own target depends on your concept. A burger counter with low labor can run above the median; a full-service room with a large team usually needs to sit below it. Set the target for the menu as a whole, then let individual dishes vary. A premium protein dish at 38% can still earn more dollars per plate than a 22% side.

Check every new price three ways before it goes live: the target percentage, the dollars the dish leaves after food cost, and what similar places nearby charge.

The online-order costs that change a dish’s true cost

The standard formula stops at ingredients. When the same bowl leaves in a bag, three more costs attach to it, and owners often forget all three.

The same $13.50 bowl on six channels

Channel Food Packaging Fees Total cost True cost %
Dine-in, paid by card (2.6% + 15¢) $4.02 $0.00 $0.50 $4.52 33.5%
Your own website, pickup (3.3% + 30¢) $4.02 $0.65 $0.75 $5.42 40.1%
Marketplace pickup (7%) $4.02 $0.65 $0.95 $5.62 41.6%
Marketplace delivery, 20% plan $4.02 $0.65 $2.70 $7.37 54.6%
Marketplace delivery, 25% plan $4.02 $0.65 $3.38 $8.05 59.6%
Marketplace delivery, 30% plan $4.02 $0.65 $4.05 $8.72 64.6%

The dish that costs 29.8% on the recipe card costs 40% when it leaves through your own website and nearly 60% on a mid-tier delivery plan. The fixed 30¢ card fee hurts single-item orders most; on a $40 order with three dishes it shrinks to 10¢ each.

Many restaurants raise app prices to compensate. At $16.50 on the 25% plan, commission is $4.13 and the total cost is $4.02 + $0.65 + $4.13 = $8.80, or 53.3% of the app price. Better, but still far above the dine-in figure. Our breakdown of what delivery apps really charge restaurants covers the other app costs, such as promotions and refunds.

Pricing an online dish from an all-in target

To hold a target that includes these costs, put the fixed costs on top and take the percentage fees out of the bottom:

Price = (plate cost + packaging + fixed fee per order) ÷ (target % – percentage fees)

That second number is the real lesson. On high-commission orders you cannot price your way back to normal food cost, so the decision is about which channel you push your regulars toward.

A note for UK readers. Calculate food cost percentage on sales excluding VAT. Hot takeaway food is standard-rated when it meets the tests in HMRC’s VAT Notice 709/1 on catering and takeaway food (updated June 2026), so a £12 hot dish at the 20% standard rate brings in £10 of net sales. A £3 plate cost is 30% of that, not the 25% you would get by dividing by the menu price.

A copyable recipe cost card template

If you are learning how to calculate food cost from scratch, start with your five best sellers rather than the whole menu. Copy this table into a spreadsheet, one tab per dish. Columns E and G are formulas: E = B ÷ D, and G = E × F. Recost the card whenever an ingredient price moves by more than a few percent, and at least once a quarter.

Dish Beef and broccoli rice bowl
Portions per batch 1 Menu price $13.50 Target food cost 30%
Date costed Nov 2026 Costed by Head chef Next review Feb 2027
A. Ingredient B. AP cost per unit C. Unit D. Yield E. EP cost per unit F. Amount per portion G. Cost per portion
Ground beef 85/15 $5.20 lb 75% $6.93 0.3125 lb $2.17
Broccoli, untrimmed $2.40 lb 81% $2.96 0.25 lb $0.74
Jasmine rice, dry $1.50 lb 290% $0.52 0.4375 lb $0.23
Soy-ginger sauce (sub-recipe) $0.15 oz 100% $0.15 2 oz $0.30
Egg $0.28 each 100% $0.28 1 $0.28
Scallion and sesame garnish $0.12
Frying oil measured $0.06
Subtotal $3.90
Q factor (3% of subtotal) $0.12
Plate cost $4.02
Plate cost % (plate cost ÷ menu price) 29.8%
Suggested price at target (plate cost ÷ target) $13.40
Online: packaging per order $0.65
Online: true cost % on own site (with card fee) 40.1%

Two habits make the card useful in the kitchen, not just the office. Print the portion amounts and a photo of the plated dish for the line. And keep the card next to the scale, because the costing is only as good as the portioning.

Where RestroPress fits

RestroPress will not calculate food cost for you. It is a WordPress plugin for taking pickup, delivery and dine-in orders on your own website, and it is worth being precise about what it changes in the numbers above.

First, the commission column. RestroPress takes no commission on orders. You still pay your payment processor’s normal fees, so the “own website” row in the channel table is the one that applies: packaging and card processing, no marketplace fee. If you want to understand what free really includes and where costs still appear, see our guide to a free online ordering system for restaurants.

Second, stock. The Inventory Management extension keeps a stock count for each menu item and each addon, deducts it with every order, emails you when an item drops to a threshold you set, and marks the item sold out at zero so nobody orders a dish you cannot make. It counts sellable portions. It does not hold recipes, track raw ingredients or work out plate cost, so you still need a recipe cost card and a stock count sheet for food cost. Inventory Management comes with the Starter, Professional, Business and Agency plans; compare them on the RestroPress pricing page.

It is not for everyone. RestroPress runs on WordPress, so you need a site and someone willing to keep it updated. Without either, a hosted ordering service is the simpler start.

Common questions

What is the formula for food cost percentage?

For a period, it is beginning inventory plus purchases minus ending inventory, divided by food sales, times 100. For one dish, it is plate cost divided by menu price, times 100. Use sales excluding sales tax or VAT, and net of discounts.

Should packaging be included in food cost?

Keep it out of the period food cost percentage so you can compare with industry benchmarks, but always include it when you judge the true cost of a takeaway or delivery dish. A 65-cent container on a $13.50 bowl adds almost five points.

What is a good food cost percentage for a restaurant?

In 2024 the median full-service restaurant spent 32.0% of sales on food and non-alcoholic drinks, and the median limited-service restaurant 32.4%, per the National Restaurant Association. Your right number depends on your prices and labor model. A small, steady gap between ideal and actual food cost matters more than hitting any single figure.

How often should I calculate food cost?

Calculate actual food cost weekly if you can, and monthly at minimum. Recost recipe cards quarterly and whenever a major ingredient changes price. Compare ideal and actual each time you count.

Why is my actual food cost higher than my recipe costs suggest?

Usually because recipe cards use invoice prices without yield, portions run heavy, waste and staff meals are not recorded, or supplier prices rose after the cards were made. Start by adding yield to your top five dishes and weighing their portions for a week.

Next step

Run the channel table for your three best sellers, then see what a flat yearly license with no order commission would cost you on the RestroPress pricing page.